Viewports > ... > Patio door (tempered glass) sprayer wand > 4 Sessions
Back Up One Level
German (Deutsch)
English
Spanish (Español)
English | Login
Patio door (tempered glass) sprayer wand

Patio door (tempered glass) sprayer wand to insert solutions between the window panes - $10 plus time constructing


A piece of 3/16 inch OD brake line at least 40 inches long can be purchased from any Automotive store and some hardware stores. Cut any threaded or flared ends off with a pipe cutter or hacksaw. Use the Rubber Blow Gun Tip from the 7 Piece Air Blow Gun Kit.
A 3 inch long piece of 1/4 inch OD vinyl tubing was then used to connect the brass connector removed from inside the Rubber Blow Gun Tip of the 7 Piece Air Blow Gun Kit, to the brake line. 5 small holes were drilled 1/2 inch apart from the other end of the brake line using a 3/64 inch diameter drill bit. A small rivet (you could use any type of plugging material) was then secured into this end of the brake line to act as a plug.
A patio door (tempered glass) sparyer wand to insert the washing and rinsing solutions between the window panes as shipped with our kits.
Video - Patio door (tempered glass) sprayer wand
 
Photo Gallery powered by TinyWebGallery 2.3powered by TinyWebGallery 2.3